Recycled concrete with 100 % recycled aggregate
Description
Structural concrete in which 100 % of the aggregate is recycled concrete aggregate (RCA AB16) from the demolition site Bayernkaserne in Munich, supplied by the project partner Ettengruber. Developed and tested by Hochschule München (HM, PP14), first in the laboratory (mixes from D.2.2.2); the test specimens of the final mix were produced at the Bayernkaserne mixing plant.
Pilot use: Campus Ost, Munich, in cooperation with the City of Munich: the bore piles and their drilling template, parts of the foundation, basement walls and one ceiling panel on the second floor. A special permission from the Bavarian building ministry was needed, because concrete with 100 % recycled aggregate is not covered by German standards.
Mix per m³ (Table 2): Variocem W5 506 kg (166 dm³); water 169 kg (169 dm³); suction water 100 kg; plasticiser + synthetic resin (50/50) 7 kg; RCA AB16 1587 kg (635 dm³); air 30 dm³.
Pumping: full-scale test with a 40 m concrete pump (Zehentner Pumpendienst); the concrete kept a consistent, workable texture.
Fresh concrete (1 m³ batch): slump flow (DIN EN 12350-5) from 55 cm to 31 cm within 90 minutes (F4 to F1), about 14 cm less after 60 minutes; fresh density about 2299 kg/m³ (DIN EN 12350-6); air content about 2.2 % (DIN EN 12350-7).
Compressive strength, cube (DIN EN 12390-3): 25.1 N/mm² at 2 days, 42.0 at 14 days, 55.8 at 28 days and 60.4 at 56 days; class C35/45 at 28 days (target C30/37).
Young's modulus (DIN EN 12390-13): 26,300 N/mm² at 28 days and 27,233 N/mm² at 56 days, clearly below the EC2 estimate (about 33,000 N/mm² for C30/37).
Bond (RILEM RC6 / DIN EN 10080): five specimens, 10 mm B500B rebar, 50 mm bond length: stable bond and post-cracking behaviour comparable to conventional concrete.
Drying shrinkage (DIN EN 12390-16): 0.65 mm/m (0.065 %) after 140 days, about 45 % above the EC2 estimate for C30/37.
Creep (DIN EN 12390-17): coefficient 1.22 after 35 days, about 17 % above the EC2 reference.
Freeze-thaw (CEN/TR 15177): 122 g/m² scaling after 56 cycles, well below the 1000 g/m² limit; D.2.2.4 states it meets class XC3.
Carbonation (DIN EN 12390-12, 3 % CO₂, 65 % RH, 20 °C): calculated service-life index above 1.5 after 45 years for exposure class XC4.
Source: ReBuilt D.2.2.4, version 4.0, 30/09/2025, section 3. Long-term monitoring results will follow in A.2.5.
Pilot use: Campus Ost, Munich, in cooperation with the City of Munich: the bore piles and their drilling template, parts of the foundation, basement walls and one ceiling panel on the second floor. A special permission from the Bavarian building ministry was needed, because concrete with 100 % recycled aggregate is not covered by German standards.
Mix per m³ (Table 2): Variocem W5 506 kg (166 dm³); water 169 kg (169 dm³); suction water 100 kg; plasticiser + synthetic resin (50/50) 7 kg; RCA AB16 1587 kg (635 dm³); air 30 dm³.
Pumping: full-scale test with a 40 m concrete pump (Zehentner Pumpendienst); the concrete kept a consistent, workable texture.
Fresh concrete (1 m³ batch): slump flow (DIN EN 12350-5) from 55 cm to 31 cm within 90 minutes (F4 to F1), about 14 cm less after 60 minutes; fresh density about 2299 kg/m³ (DIN EN 12350-6); air content about 2.2 % (DIN EN 12350-7).
Compressive strength, cube (DIN EN 12390-3): 25.1 N/mm² at 2 days, 42.0 at 14 days, 55.8 at 28 days and 60.4 at 56 days; class C35/45 at 28 days (target C30/37).
Young's modulus (DIN EN 12390-13): 26,300 N/mm² at 28 days and 27,233 N/mm² at 56 days, clearly below the EC2 estimate (about 33,000 N/mm² for C30/37).
Bond (RILEM RC6 / DIN EN 10080): five specimens, 10 mm B500B rebar, 50 mm bond length: stable bond and post-cracking behaviour comparable to conventional concrete.
Drying shrinkage (DIN EN 12390-16): 0.65 mm/m (0.065 %) after 140 days, about 45 % above the EC2 estimate for C30/37.
Creep (DIN EN 12390-17): coefficient 1.22 after 35 days, about 17 % above the EC2 reference.
Freeze-thaw (CEN/TR 15177): 122 g/m² scaling after 56 cycles, well below the 1000 g/m² limit; D.2.2.4 states it meets class XC3.
Carbonation (DIN EN 12390-12, 3 % CO₂, 65 % RH, 20 °C): calculated service-life index above 1.5 after 45 years for exposure class XC4.
Source: ReBuilt D.2.2.4, version 4.0, 30/09/2025, section 3. Long-term monitoring results will follow in A.2.5.
BIM - Family
Serial number
c125d3d0-fd83-4cbe-bb80-629673469996
LCA results (CO2 equivalent)
Functional unit weight
0.00 Kg
Proportion biobased input in weight
0.00 Kg
Proportion secondary material input in weight
0.00 Kg
Product technical lifetime (in year)
Recyclability proportion in weight (%)
0.00%
Reusability proportion in weight (%)
0.00%